Why is Telnet not working ?

Why is Telnet not working ?

 Verify that the Telnet option is Enabled.  To verify, open the system settings and go to Settings>Advanced> Security: Enable Telnet Interface option should be Enabled.

    • Related Articles

    • Why is the system’s remote control not working ?

      If pressing keys on the remote makes the lighted power button flash, but the system does not respond, then the remote is working but not being picked up by the system.  Try moving the remote’s USB dongle to a different USB port and retry the remote.  ...

    • The Video output on the Huddle or Versa hub is not working

      1) First check whether the display HDMI ports are working fine 2) install DisplayLink drivers in the computer to solve the issue. DisplayLink drivers can be downloaded here:  https://www.displaylink.com/downloads Settings on the computer control what ...

    • Why is Collaborate share not working ?

      Verify that the Collaborate share option is enabled. To verify, open the system settings and go to Settings> Presentation: Enable Wireless Sharing.

    • In Collaborate Live / Pro codec, the remote control is not working

      1) To make sure the dongle is functional, plug the dongle into a PC and make sure it is recognized by the PC.  It would show up as a “HID-Compliant Mouse”. 2) Try the pairing procedure - Remove the dongle from the codec.  Press ok & back button on ...