The system will not power on with the remote.
| The
"power button" on the Collaborate remote control will put the
system in and out of "Sleep" mode.
If the system is "Shutdown" with the on screen menu, the
only way to power the unit back up is by pressing the power button on the
system. |
Related Articles
Re-Pairing the Collaborate RF Remote to the USB Dongle
Pairing the Remote Control with a USB dongle receiver 1. Start with batteries installed in the remote control and the USB dongle not plugged in the codec. 2. Simultaneously press the OK and Back buttons on the remote control and hold for 3 ...
Why is the system’s remote control not working ?
If pressing keys on the remote makes the lighted power button flash, but the system does not respond, then the remote is working but not being picked up by the system. Try moving the remote’s USB dongle to a different USB port and retry the remote. ...
In Collaborate Live / Pro codec, the remote control is not working
1) To make sure the dongle is functional, plug the dongle into a PC and make sure it is recognized by the PC. It would show up as a “HID-Compliant Mouse”. 2) Try the pairing procedure - Remove the dongle from the codec. Press ok & back button on ...
My Collaborate system will not boot up (no video is displayed on the monitor), why ?
Check the monitor to make sure that the monitor is turned on and connected to the code, Check the camera cable and make sure you have plugged the camera cable into the codec, Disconnect camera and microphone from the system and restart the system ...
I inverted the image on my Unite 200 camera, but it resets when the camera loses power.
The image flip settings in the Unite 200 camera will be retained if set in a very specific manner.= Through the Unite 200 web interface please check the following: In the web interface "Video" menu, if the video format is set to “Dial Priority“, ...