In Unite 200 camera,is it possible to use the USB output and the HDMI out at the same time ?

• Related Articles

• How do I get audio to output on the HDMI from my Unite 200 camera ?

  With the Unite 200 camera the audio input is only used for streaming video on the LAN, the audio is not carried through to the USB or HDMI output.

• Will the Unite cameras work on USB 2.0 ?

  The Unite 150 and 200 cameras will work on USB 2.0 but the video quality will be reduced as USB 2.0 only has about 10% of the bandwidth of USB 3.0 With our testing the best video quality we saw with USB 2.0 was 720P30, but you may see lower quality ...

• Can I use the Unite 50 on a USB extender ?

  The Unite 50 is powered over the USB cable and has been tested and does work with our 10m and 30m Fiber USB 3.0 cables as long as those are getting sufficient power.

• How can we reset the network settings on the Unite 200 camera ?

  Press * # {Manual] on the remote to reset the camera to the factory settings. Note: to use this shortcut, press the buttons in that order, not at the same time.  The "Manual" button is in the bottom right corner of the Unite camera remote. 

• I inverted the image on my Unite 200 camera, but it resets when the camera loses power.

  The image flip settings in the Unite 200 camera will be retained if set in a very specific manner.=  Through the Unite 200 web interface please check the following: In the web interface "Video" menu, if the video format is set to “Dial Priority“, ...