How can you check the P Link device connectivity detection through Telnet ?

• Related Articles

• Can Huddle be used for USB 2.0 connectivity to PC and how about the quality of audio/Video ?

  Yes, the Huddle can be used for USB 2.0 connectivity.  Audio will not be affected and will be same as USB 3.0 connectivity.  Video will be affected in comparison to USB 3.0 and will be reduced to 720p in USB 2.0

• Procedure to connect through telnet of the DSP and Command to factory reset the DSP.

  Connect the DSP to telnet through USB(169.254.99.202) or through LAN(user defined IP Address) at port 23.Use username:clearone,Password:converge.Enter "FACTORYDEFAULT" to factory reset the DSP.

• Blue tooth expander: 1) Will the bluetooth expander remember the paired device or does it need to be paired everytime when the Device goes out of range and returns to In range 2) Is there any protocol restriction to use with an Iphone

  1)Bluetooth expander cannot remember the paired device and it needs to be paired again everytime after it is disconnected from the paired device. 2)No protocol restriction to use with Iphone

• Beamforming mic signal not passing beyond post gate of the DSP (Converge Pro 880T)

  1) Check the cable connectivity between the DSP and the BFM for loose connections. 2) Upgrade the DSP and BFM to latest Firmware version 4.4 3)There may be a memory error in the DSP: Default the DSP through Telnet using the command is #**Default. ...

• Where can I download drivers for my Chat device ?

  There are no standalone custom drivers for the Chat devices, they are plug-and-play and use standard OS drivers.