How can we reset the network settings on the Unite 200 camera ?

• Related Articles

• Collaborate Network Setup

  Collaborate Network Setup Information: In order to videoconference via the network, some network settings must be set by your network manager. SYSTEM PLACED IN THE DMZ: 1. A reserved static IP address 2. Subnet Mask 3. Default Gateway address 4. DNS ...

• I inverted the image on my Unite 200 camera, but it resets when the camera loses power.

  The image flip settings in the Unite 200 camera will be retained if set in a very specific manner.=  Through the Unite 200 web interface please check the following: In the web interface "Video" menu, if the video format is set to “Dial Priority“, ...

• How do I get audio to output on the HDMI from my Unite 200 camera ?

  With the Unite 200 camera the audio input is only used for streaming video on the LAN, the audio is not carried through to the USB or HDMI output.

• Where do I find documentation for the Unite cameras ?

  You can find Unite camera documentation in our Resource library found here:  https://www.clearone.com/professional-cameras-1

• How do I change the IR address of my Unite 50 / 150 / 200 camera ?

  The instructions for changing the IR address are shown in the manual, here is how: Set Camera IR Address Buttons [*]+[＃]+[F1]: Address1 [*]+[＃]+[F2]: Address2 [*]+[＃]+[F3]: Address3 [*]+[＃]+[F4]: Address4 For example:  Press * then the #, and the F4 ...