Incoming VOIP calls are received, but we are unable to make outgoing calls.

• Related Articles

• We are unable to make more than 3 party conference calls when registered to a Cisco VOIP server, How can we enable it to make 5 party calls ?

  In Cisco CUCM enable the third party SIP device option as "Advanced" instead of "Basic" to enable 5 party conference calls.

• How can you confirm VOIP registration ?

  1) Send the command  "VOIPUPDATE *" through telnet and the response should be "REG Succeed" to confirm a successful registration.  If you don't get that reply, the registration wass unsuccessful. 2) When connected through ClearOne Dialer with ...

• Unable to install interact software in Windows 10

  The old Interact software will only install successfully with Win XP.  The latest version of Interact was released recently and available on the ClearOne website which will install in the latest Windows OS including Win10.

• The DSP can be accessed through Telnet but we are unable to access the DSP through the Console software.

  1) Confirm that the DSP firmware and Console software are compatible 2) The following ports need to be open in the Laptop to connect through Console:  FTP port 21, and UDP port 3602, Discovery (already open since they can discover)

• What is the difference in the connection settings of Clearone Dialer with respect to LABEL ?

  Label in connection setting for VOIP is entered with the channel name of VOIP without suffix (For eg:VOIPCALL) but for telco it needs to be entered with the suffix)Foreg(TELCOCALL_RX)