Do the Beamforming MIc Array or BMA CTs units use Dante?

• Related Articles

• Can I use the WS800 system with only the diplole antennas ?

  We always recommend that you use ceiling mount or mic stand mount (Powered) extension antennas. There are however some exceptions: 1. Less than 4 transmitters 2. Must be line of site. 3. Must be a huddle space or small conference room. 

• Beamforming mic signal not passing beyond post gate of the DSP (Converge Pro 880T)

  1) Check the cable connectivity between the DSP and the BFM for loose connections. 2) Upgrade the DSP and BFM to latest Firmware version 4.4 3)There may be a memory error in the DSP: Default the DSP through Telnet using the command is #**Default. ...

• Can we assign an IP address to the DANTE Ports of the DSP ?

  The Dante ports IP Address is auto assigned and we cannot assign an ip address.  The IP address can be viewed in the Dante control software or using telnet with the command -BOX BOXname DANTE IP_ADDRESS1

• Can I use any POE injector for my PLink devices such as the Beamformer and BMA CT ?

  Your power injector needs to meet the following specifications: POE +, 56V, 640mA, Mode B. For additional information please see the following https://www.clearone.com/sites/default/files/2019-05/PoE%20and%20CP2%20P-Link%20Products.pdf

• What is the best frequency to use in my area ?

  Please check you local DTV channel line up in your Zipcode. The best tool to use is the FCC website:  https://www.fcc.gov/media/engineering/dtvmaps