Can we used a Converge Pro 2 with a Cisco Phone by using the Cisco breakout box like we use in Converge Pro 1 ?

• Related Articles

• Can the Huddle be controlled using the same serial commands as used for Converge Pro 2 ?

  Yes, the Huddle can be controlled using the same serial commands as used for converge pro 2

• Is it possible to do camera tracking through using the BFMA mics and the Converge Pro 2 DSP ?

  Camera tracking with the Converge Pro 2 DSP is possible using table top mics with the support of an external control system, but it is not possible with the BFMA or BMACT.

• I updated the firmware on my Converge Pro 2 and now I can't see it to connect to it.

  Check the version of the console software you are using then use the Check for Updates tool in the Help menu to see what the newest console software version is.  Likely you just need to use a newer version of the console software to find it again.

• Beamforming mic signal not passing beyond post gate of the DSP (Converge Pro 880T)

  1) Check the cable connectivity between the DSP and the BFM for loose connections. 2) Upgrade the DSP and BFM to latest Firmware version 4.4 3)There may be a memory error in the DSP: Default the DSP through Telnet using the command is #**Default. ...

• Do the Beamforming MIc Array or BMA CTs units use Dante?

  No, all of our Beamforming Mic Array units, inluding the BMA CT, communicate using our proprietary P-Link protocol and do not use Dante.