Can any brand of USB extender or cable be used with the USB audio port of the DSP ?

• Related Articles

• Can Huddle be used for USB 2.0 connectivity to PC and how about the quality of audio/Video ?

  Yes, the Huddle can be used for USB 2.0 connectivity.  Audio will not be affected and will be same as USB 3.0 connectivity.  Video will be affected in comparison to USB 3.0 and will be reduced to 720p in USB 2.0

• Why is my Windows 10 computer not recognizing the CP2 DSP as a USB audio source ?

  Your antivirus program may be blocking access to the USB port. In the case of Sentinel One there is a driver that is loaded. If the Converge Pro 2 is listed as and Unknow Device you can look in the the Device Properties for the device to determine if ...

• Can a Converge Pro 2 be connected to a Collaborate Live device through USB audio, and can we change the mic/speaker level in the codec settings ?

  Yes, a CP2 can be routed to the collaborate live devices through USB audio port.  With the latest software release the mic/speaker level settings in the codec can be adjusted.

• Procedure to connect through telnet of the DSP and Command to factory reset the DSP.

  Connect the DSP to telnet through USB(169.254.99.202) or through LAN(user defined IP Address) at port 23.Use username:clearone,Password:converge.Enter "FACTORYDEFAULT" to factory reset the DSP.

• VC input audio through DSP is fluctuating.

  The VC audio need to be set as line input and not as mic input.  Setting the VC audio to be mic input makes AEC to be applied to VC input audio and makes the audio fluctuate.