After my Unite camera powers up it points straight ahead, how can I make it aim somewhere else after booting ?
Aim
and zoom the camera where you would like it set as a default and store that
as preset "0". About 15
seconds after powering up, the camera will automatically restore preset
"0". |
Related Articles
How do I get audio to output on the HDMI from my Unite 200 camera ?
With the Unite 200 camera the audio input is only used for streaming video on the LAN, the audio is not carried through to the USB or HDMI output.
How can we reset the network settings on the Unite 200 camera ?
Press * # {Manual] on the remote to reset the camera to the factory settings. Note: to use this shortcut, press the buttons in that order, not at the same time. The "Manual" button is in the bottom right corner of the Unite camera remote.
I inverted the image on my Unite 200 camera, but it resets when the camera loses power.
The image flip settings in the Unite 200 camera will be retained if set in a very specific manner.= Through the Unite 200 web interface please check the following: In the web interface "Video" menu, if the video format is set to “Dial Priority“, ...
Can you provide drivers for my ClearOne Unite camera ?
ClearOne does not provide drivers for our cameras, they use standard windows and IOS drivers. Please make sure all Windows / IOS updates are complete, and you may also need driver updates from the PC manufacturer.
How do I change the IR address of my Unite 50 / 150 / 200 camera ?
The instructions for changing the IR address are shown in the manual, here is how: Set Camera IR Address Buttons [*]+[#]+[F1]: Address1 [*]+[#]+[F2]: Address2 [*]+[#]+[F3]: Address3 [*]+[#]+[F4]: Address4 For example: Press * then the #, and the F4 ...